WEARABLE DEVICE BASED ON AN INERTIAL SENSOR WITH SD MEMORY STORAGE CAPACITY

Authors

  • Samuel Casanova Calzadilla
  • Osniel Alejandro García Orihuela
  • Elías Osmany García Alvaredo
  • Mario Bernal Pérez
  • Gianna Arencibia Castellanos
  • Fidel Ernesto Hernández Montero

Abstract

Automation to obtain certain gait parameters from inertial units is a fundamental need to facilitate the evaluation of physical performance. This project proposes the development of a biomechanical gait parameter measurement device that can be used as a medical test for elderly patients. It uses an ESP32 microcontroller and an ICM-20948 module. The ESP32 microcontroller collects data from the inertial sensor and transmits it via Bluetooth or stores it on an SD card for further analysis.

 

Downloads

Download data is not yet available.

Downloads

Published

2025-04-04 — Updated on 2025-04-14

Versions

How to Cite

Casanova Calzadilla, S., Osniel Alejandro García Orihuela, Elías Osmany García Alvaredo, Mario Bernal Pérez, Gianna Arencibia Castellanos, & Fidel Ernesto Hernández Montero. (2025). WEARABLE DEVICE BASED ON AN INERTIAL SENSOR WITH SD MEMORY STORAGE CAPACITY. Telemática, 23, 54–64. Retrieved from https://revistatelematica.cujae.edu.cu/index.php/tele/article/view/988 (Original work published April 4, 2025)

Issue

Vol. 23 (2024): Vol. 23 (2024)

Section

Papers

License

The authors who publish in this journal agree to the following terms:

  1. The authors retain the copyright and guarantee to the journal the right to be the first publication of the work are distributed under a license of use and distribution "Creative Commons Attribution-NonCommercial-NoDerivativeWorks 3.0 Unported" (CC BY-NC-ND 3.0) You can consult from here the informative version and the legal text of the license that allows others to share the work with an acknowledgement of the authorship of the work and the initial publication in this journal.
  2. Authors may separately enter into additional agreements for non-exclusive distribution of the version of the work published in the journal (for example, placing it in an institutional repository or publishing it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are allowed and encouraged to disseminate their work electronically (e.g., in institutional repositories or on their own website) before and during the submission process, as this can lead to productive exchanges as well as earlier and greater citation of published work (see The Effect of Open Access).