Circular polarized microstrip radiant system for 2.4 GHZ RFID aplications.
Abstract
The present research work proposes the design and simulation of a pentagonal patch antenna with circular polarization for the 2.4 GHz band by means of electromagnetic coupling in a single layer. The proposed configuration aims to be used in RFID (Radio Frequency Identification) systems to achieve good radiation characteristics when sending or receiving data from the RFID tags implanted in the objects to be identified, keeping the design as simple as possible. Circular polarization is obtained through the electromagnetic coupling technique by modifying the dimensions of the antenna feed line and is optimized by introducing disturbances in the geometry of the patch. The proposed antenna has small and acceptable dimensions for possible use in portable RFID readers, a gain of approximately 1.642 dB at 2.44 GHz, impedance matching and circular polarization bandwidths of 111.6 MHz and 138 MHz, which represents a 4.75% and 5.65% respectively of the center frequency of the working band.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
The authors who publish in this journal agree to the following terms:
- The authors retain the copyright and guarantee to the journal the right to be the first publication of the work are distributed under a license of use and distribution "Creative Commons Attribution-NonCommercial-NoDerivativeWorks 3.0 Unported" (CC BY-NC-ND 3.0) You can consult from here the informative version and the legal text of the license that allows others to share the work with an acknowledgement of the authorship of the work and the initial publication in this journal.
- Authors may separately enter into additional agreements for non-exclusive distribution of the version of the work published in the journal (for example, placing it in an institutional repository or publishing it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are allowed and encouraged to disseminate their work electronically (e.g., in institutional repositories or on their own website) before and during the submission process, as this can lead to productive exchanges as well as earlier and greater citation of published work (see The Effect of Open Access).